← Tools
Try CapCad →
Road marking norms by country
The document each country's road markings come from, a link to the regulator, and the dimensions CapCad draws from it — read straight out of the drawing engine, so this page and the software always agree.
Perú
Brasil
España
Portugal
France
UK
USA
México
Chile
Colombia
Argentina
Ecuador
Paraguay
Canada
الأردن
日本
مصر
السعودية
Indonesia
SADC
SIECA
Deutschland
Ireland
Nederland
Italia
India
Cuba
Regulator
Housing and Building National Research Center
Norms
Published by the issuing body — we link to the source rather than host a copy, because these documents get revised.
Egyptian Code for Urban and Rural Road Works, Part 2 — Traffic Studies (ECP-104/2)
HBRC, by Ministerial Decree 158 · 1998
Line widths and cadences, the double line rules, the yellow edge line, and the sight distances below which a continuous line becomes mandatory. The code states in its own first section that it derives from American practice.
Traffic Law No. 66 of 1973 and its executive regulation
Government of Egypt · 1973
The legal effect of markings and signs. The code carries the dimensions; the law carries the obligation.
Vienna Convention on Road Signs and Signals
United Nations · 1968
Egypt acceded in December 2023, twenty-five years after the code was issued. No reissued Egyptian standard reconciling the two has been published.
Draw these to the norm, in your CAD
Every dimension on this page is a preset in CapCad — pick the country profile and the markings come out to its manual.