← Tools
Try CapCad →
Road marking norms by country
The document each country's road markings come from, a link to the regulator, and the dimensions CapCad draws from it — read straight out of the drawing engine, so this page and the software always agree.
Perú
Brasil
España
Portugal
France
UK
USA
México
Chile
Colombia
Argentina
Ecuador
Paraguay
Canada
الأردن
日本
مصر
Angola
Moçambique
السعودية
Indonesia
SADC
SIECA
Deutschland
Ireland
Nederland
Italia
India
Cuba
Regulator
Instituto Nacional dos Transportes Rodoviários
Norms
Published by the issuing body — we link to the source rather than host a copy, because these documents get revised.
Regulamento de Sinais de Trânsito
Governo de Moçambique
Sign codes and marking meanings, white lines 10 cm wide and edge lines 15 cm. It gives no dash, gap or line separation. Its codes are its own: here R1 is a hatched area, not the stop sign of the regional manual.
Código da Estrada, Decreto-Lei n.º 1/2011
Governo de Moçambique · 2011
Left-hand traffic, overtaking on the right, and the places where overtaking is banned.
Desenhos-tipo para Obras de Estradas e Pontes, ANE/DT/A007
Administração Nacional de Estradas · 2018
Line cadences, the 130 mm gap of double lines, and the chevron and island hatching. It paints the centre line yellow where the regulation says white.
Draw these to the norm, in your CAD
Every dimension on this page is a preset in CapCad — pick the country profile and the markings come out to its manual.