← Tools
Try CapCad →
Road marking norms by country
The document each country's road markings come from, a link to the regulator, and the dimensions CapCad draws from it — read straight out of the drawing engine, so this page and the software always agree.
Perú
Brasil
España
Portugal
France
UK
USA
México
Chile
Colombia
Argentina
Ecuador
Paraguay
Canada
SIECA
Norms
Published by the issuing body — we link to the source rather than host a copy, because these documents get revised.
Manual de Dispositivos de Control del Tránsito Automotor para Calles y Carreteras
MTC · 2016
Marcas planas en el pavimento: líneas de eje, de carril, de borde y de pare.
Longitudinal markings CapCad draws (15)
| Marking | Norm reference |
|---|---|
| M01 | M01 - Centre line, continuous (LFO-1 equiv) |
| M02 | M02 - Centre line, double continuous (LFO-3 equiv) |
| M03 | M03 - Centre line, broken (LFO-2 equiv) |
| M04 | M04 - Centre line, continuous + broken (LFO-4 equiv) |
| M11 | M11 - Lane line, continuous (LMS-1 equiv) |
| M12 | M12 - Lane line, broken (M11 with cadence) |
| M13 | M13 - Lane line, broken (LMS-2 equiv) |
| M21 | M21 - Edge lines, continuous (LBO equiv) |
| M22 | M22 - Continuity line (LCO equiv) |
| M31 | M31 - Stop line (LRE equiv) |
| M32 | M32 - Give way line (LDP equiv) |
| Peru1 | MTC 2016 Tabla 3.2, situación «Rural» y «Urbana > 60 km/h» — línea central segmentada amarilla, patrón 12 m con relación 3 a 5: 4,5 m de demarcación y 7,5 m de brecha. Ancho 10 a 15 cm (§3.5.5) |
| Peru2 | MTC 2016 Tabla 3.2, situación «Urbana ≤ 60 km/h» — línea segmentada, patrón 8 m con relación 3 a 5: 3 m de demarcación y 5 m de brecha. Ancho 10 a 15 cm |
| Peru3 | MTC 2016 Tabla 3.2, situación «Línea de continuidad» — patrón 2 m con relación 1 a 1: 1 m de demarcación y 1 m de brecha. Blanca, separa corrientes en el mismo sentido |
| Peru4 | MTC 2016 Tabla 3.2, situación «Borde calzada» — patrón 4 m con relación 2 a 2: 2 m de demarcación y 2 m de brecha. Blanca, en el borde de la calzada o superficie de rodadura |
Draw these to the norm, in your CAD
Every dimension on this page is a preset in CapCad — pick the country profile and the markings come out to its manual.