← Outils
Essayer CapCad →
Normes de marquage routier par pays
Le texte dont proviennent les marques de chaque pays, un lien vers l'autorité de tutelle et les dimensions que CapCad en tire — lues directement dans le moteur de tracé, de sorte que cette page et le logiciel ne peuvent pas diverger.
Perú
Brasil
España
Portugal
France
UK
USA
México
Chile
Colombia
Argentina
Ecuador
Paraguay
Canada
الأردن
日本
مصر
السعودية
Indonesia
SADC
SIECA
Deutschland
Ireland
Nederland
Italia
India
Cuba
Textes de référence
Publiés par l'organisme émetteur — nous renvoyons à la source plutôt que d'en héberger une copie, car ces documents sont révisés.
Saudi Highway Code SHC 602 — Manual on Uniform Traffic Control Devices
Roads General Authority
Chapter 4 carries every marking width, cadence and colour, the hatch and chevron geometry at 45 degrees, and the passing sight distances that trigger a no-passing zone. Chapter 3 carries the sign catalogue.
Convention on Road Signs and Signals
United Nations · 1968
Acceded 31 March 2022. This is why Saudi warning signs are white triangles with a red border rather than the yellow diamonds still described by older sources.
Traffic Law, Royal Decree M/85
Kingdom of Saudi Arabia · 1428 H
Article 53 fixes the right-hand side of travel; article 51 makes the annexed marks and signs part of the law itself.
Longitudinal markings CapCad draws (15)
| Marque | Référence normative |
|---|---|
| Exit ramp channelizing dotted line | Dotted WHITE lane line at a high-speed exit ramp, 1 m mark and 1 m gap (SHC 602 s. 4.2.7 footnote 2) |
| L1-1a - Centre line, 6 m + 12 m | Broken centre line separating OPPOSING directions, WHITE, 0,15 m wide, 6 m mark and 12 m gap. Applies at design speed 100 km/h and above (SHC 602 Table 4-1) |
| L1-1b - Centre line, 3 m + 6 m | Broken centre line separating OPPOSING directions, WHITE, 0,15 m wide, 3 m mark and 6 m gap. Applies at 80 to 100 km/h (SHC 602 Table 4-1) |
| L1-1c - Centre line, 2 m + 4 m | Broken centre line separating OPPOSING directions, WHITE, 0,10 m wide, 2 m mark and 4 m gap. Applies at below 80 km/h (SHC 602 Table 4-1) |
| L2-1a - Lane line, 6 m + 12 m | Broken lane line between lanes in the SAME direction, WHITE, 0,20 m wide, 6 m mark and 12 m gap. Applies at design speed 100 km/h and above (SHC 602 Table 4-2) |
| L2-1b - Lane line, 3 m + 6 m | Broken lane line between lanes in the SAME direction, WHITE, 0,15 m wide, 3 m mark and 6 m gap. Applies at 80 to 100 km/h (SHC 602 Table 4-2) |
| L2-1c - Lane line, 2 m + 4 m | Broken lane line between lanes in the SAME direction, WHITE, 0,10 m wide, 2 m mark and 4 m gap. Applies at below 80 km/h (SHC 602 Table 4-2) |
| L3-1a - No passing, two direction, above 80 kmh | Two continuous WHITE lines, 0,15 m each, prohibiting passing in BOTH directions. Above 80 km/h (SHC 602 Table 4-3, fig. 4-3) |
| L3-1b - No passing, two direction, below 80 kmh | Two continuous WHITE lines, 0,10 m each, prohibiting passing in both directions. Below 80 km/h (SHC 602 Table 4-3) |
| L3-2a - No passing, one direction, above 80 kmh | One continuous and one broken WHITE line, 0,15 m, prohibiting passing in ONE direction only. Above 80 km/h (SHC 602 Table 4-3, fig. 4-4) |
| L3-2b - No passing, one direction, below 80 kmh | One continuous and one broken WHITE line, 0,10 m, prohibiting passing in one direction only. Below 80 km/h (SHC 602 Table 4-3) |
| L4-1a - Prohibitory centre line | Continuous WHITE centre line telling drivers they may not leave their lane. Undivided road, one lane each way, 80 km/h or less. Mandatory at priority and signalised intersections and roundabouts, for at least 25 m back from the stop or yield line (SHC 602 Table 4-5, s. 4.2.4) |
| L5-1a - Edge line (yellow), 100 kmh or less, undivided | Continuous YELLOW edge line, 0,15 m, separating the right-hand shoulder from the travel lanes. 100 km/h or less, undivided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6) |
| L5-1b - Edge line (yellow), 100 kmh or less, divided | Continuous YELLOW edge line, 0,15 m, separating the right-hand shoulder from the travel lanes. 100 km/h or less, divided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6) |
| L5-1c - Edge line (yellow), above 100 kmh, divided | Continuous YELLOW edge line, 0,20 m, separating the right-hand shoulder from the travel lanes. Above 100 km/h, divided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6) |
Règles de hachures comparer tous les pays →
Chaque tracé ci-dessous est produit par le moteur de CapCad lui-même, à partir des chiffres de sa propre ligne — ce n'est pas une illustration.
| Tracé selon la règle | Préréglage | Vide (m) | Hachure (m) | Rive (m) | Angle (°) |
|---|---|---|---|---|---|
| SAUDI-L6-1a HATCHED | 1.31 | 0.1 | 0.15 | 90 | |
| SAUDI-L6-1b HATCHED | 3.88 | 0.15 | 0.15 | 90 | |
| SAUDI-L6-1c HATCHED | 1.26 | 0.15 | 0.12 | 90 | |
| SAUDI-L6-1d HATCHED | 1.97 | 0.15 | 0.15 | 90 | |
| SAUDI-L7-1 CHEVRON | 1.31 | 0.1 | 0.15 | 90 | |
| SAUDI-L7-2 CHEVRON | 0.41 | 1.0 | 0.20 | 90 |
Tracez-les selon la norme, dans votre CAO
Chaque dimension de cette page est un préréglage de CapCad — choisissez le profil du pays et les marques sortent conformes à son texte.