← Ferramentas

Normas de sinalização horizontal por país

O documento de onde saem as marcas rodoviárias de cada país, uma ligação ao regulador e as dimensões que o CapCad desenha a partir dele — lidas diretamente do motor de desenho, por isso esta página e o programa nunca divergem.

Perú Brasil España Portugal France UK USA México Chile Colombia Argentina Ecuador Paraguay Canada الأردن 日本 مصر السعودية Indonesia SADC SIECA Deutschland Ireland Nederland Italia India Cuba
Entidade reguladora
Roads General Authority
Site oficial (RGA) ↗

Normas

Publicadas pela entidade emissora — ligamos à fonte em vez de alojar uma cópia, porque estes documentos são revistos.

Saudi Highway Code SHC 602 — Manual on Uniform Traffic Control Devices
Roads General Authority
Chapter 4 carries every marking width, cadence and colour, the hatch and chevron geometry at 45 degrees, and the passing sight distances that trigger a no-passing zone. Chapter 3 carries the sign catalogue.
Convention on Road Signs and Signals
United Nations · 1968
Acceded 31 March 2022. This is why Saudi warning signs are white triangles with a red border rather than the yellow diamonds still described by older sources.
Traffic Law, Royal Decree M/85
Kingdom of Saudi Arabia · 1428 H
Article 53 fixes the right-hand side of travel; article 51 makes the annexed marks and signs part of the law itself.

Marcas longitudinais que o CapCad desenha (15)

Marca Referência normativa
Exit ramp channelizing dotted line Dotted WHITE lane line at a high-speed exit ramp, 1 m mark and 1 m gap (SHC 602 s. 4.2.7 footnote 2)
L1-1a - Centre line, 6 m + 12 m Broken centre line separating OPPOSING directions, WHITE, 0,15 m wide, 6 m mark and 12 m gap. Applies at design speed 100 km/h and above (SHC 602 Table 4-1)
L1-1b - Centre line, 3 m + 6 m Broken centre line separating OPPOSING directions, WHITE, 0,15 m wide, 3 m mark and 6 m gap. Applies at 80 to 100 km/h (SHC 602 Table 4-1)
L1-1c - Centre line, 2 m + 4 m Broken centre line separating OPPOSING directions, WHITE, 0,10 m wide, 2 m mark and 4 m gap. Applies at below 80 km/h (SHC 602 Table 4-1)
L2-1a - Lane line, 6 m + 12 m Broken lane line between lanes in the SAME direction, WHITE, 0,20 m wide, 6 m mark and 12 m gap. Applies at design speed 100 km/h and above (SHC 602 Table 4-2)
L2-1b - Lane line, 3 m + 6 m Broken lane line between lanes in the SAME direction, WHITE, 0,15 m wide, 3 m mark and 6 m gap. Applies at 80 to 100 km/h (SHC 602 Table 4-2)
L2-1c - Lane line, 2 m + 4 m Broken lane line between lanes in the SAME direction, WHITE, 0,10 m wide, 2 m mark and 4 m gap. Applies at below 80 km/h (SHC 602 Table 4-2)
L3-1a - No passing, two direction, above 80 kmh Two continuous WHITE lines, 0,15 m each, prohibiting passing in BOTH directions. Above 80 km/h (SHC 602 Table 4-3, fig. 4-3)
L3-1b - No passing, two direction, below 80 kmh Two continuous WHITE lines, 0,10 m each, prohibiting passing in both directions. Below 80 km/h (SHC 602 Table 4-3)
L3-2a - No passing, one direction, above 80 kmh One continuous and one broken WHITE line, 0,15 m, prohibiting passing in ONE direction only. Above 80 km/h (SHC 602 Table 4-3, fig. 4-4)
L3-2b - No passing, one direction, below 80 kmh One continuous and one broken WHITE line, 0,10 m, prohibiting passing in one direction only. Below 80 km/h (SHC 602 Table 4-3)
L4-1a - Prohibitory centre line Continuous WHITE centre line telling drivers they may not leave their lane. Undivided road, one lane each way, 80 km/h or less. Mandatory at priority and signalised intersections and roundabouts, for at least 25 m back from the stop or yield line (SHC 602 Table 4-5, s. 4.2.4)
L5-1a - Edge line (yellow), 100 kmh or less, undivided Continuous YELLOW edge line, 0,15 m, separating the right-hand shoulder from the travel lanes. 100 km/h or less, undivided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6)
L5-1b - Edge line (yellow), 100 kmh or less, divided Continuous YELLOW edge line, 0,15 m, separating the right-hand shoulder from the travel lanes. 100 km/h or less, divided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6)
L5-1c - Edge line (yellow), above 100 kmh, divided Continuous YELLOW edge line, 0,20 m, separating the right-hand shoulder from the travel lanes. Above 100 km/h, divided. Edge lines are yellow on single and dual carriageways alike (SHC 602 s. 4.2.5, Table 4-6)

Regras de zebrado comparar todos os países →

Cada desenho abaixo é produzido pelo próprio motor do CapCad, a partir dos números da sua linha — não é uma ilustração.

Desenhado conforme a regra Preset Vão (m) Franja (m) Canalização (m) Ângulo (°)
SAUDI-L6-1a HATCHED 1.31 0.1 0.15 90
SAUDI-L6-1b HATCHED 3.88 0.15 0.15 90
SAUDI-L6-1c HATCHED 1.26 0.15 0.12 90
SAUDI-L6-1d HATCHED 1.97 0.15 0.15 90
SAUDI-L7-1 CHEVRON 1.31 0.1 0.15 90
SAUDI-L7-2 CHEVRON 0.41 1.0 0.20 90
Desenhe estas marcas conforme a norma, no seu CAD

Cada dimensão desta página é um preset do CapCad — escolha o perfil do país e as marcas saem conforme o seu manual.

Experimentar o CapCad →